STRATOCOOLING. REDEFINED.
Cooling selected for Fiji conditions

Fiji runs hot.
Your cooling should be ready for it.

Inverter performance. R32 refrigerant. Purple Fin coil protection. Local support in Fiji.

Explore the range
FROM FIJI HEAT

To STRATO comfort.

Scroll and watch the environment move from hot and dry to calm and cool.

32°CFIJI HEAT

FOR THE FIRST TIME, STRATO IS INTRODUCING PURPLE FIN TO ITS FIJI RANGE

WHY PURPLE?

Because Fiji can be tough on outdoor coils.

Heat, humidity and coastal air can be demanding. Purple Fin adds a hydrophilic, anti-corrosion coating to the aluminium fins of the heat exchanger — extra protection where exposure happens.

What Purple Fin means in simple termsEasy comparison
WHAT MATTERS
STANDARD FIN SURFACE
STRATO PURPLE FIN
Fin surface
Aluminium fin without STRATO's Purple Fin protective layer.
Aluminium fin with a hydrophilic, anti-corrosion Purple Fin coating.
Coastal exposure
Salt and coastal air reach the fin surface with no added STRATO Purple Fin barrier.
Adds an extra protective layer between the fin surface and corrosive coastal conditions.
Moisture behaviour
How water behaves depends on the fin treatment used.
The hydrophilic surface is designed to help water spread and drain across the fin face.
Coil condition over time
Long-term condition relies heavily on environment, cleaning and regular maintenance.
Extra protection can help the fins stay in better condition. Regular servicing is still important.
Protection reference
No STRATO Purple Fin coating specification applies.
The supplied coating reference uses ASTM B117 / ISO 9227 neutral salt-spray testing.
What it means for you
A standard coil still needs good installation, cleaning and servicing.
An added layer of protection designed for the hot, humid and coastal conditions common in Fiji.

Purple Fin is added protection, not a replacement for correct installation and regular maintenance. Other brands and coil treatments vary.

Close-up of a Purple Fin heat exchanger coilPURPLE FIN COIL

CLICK A CONDITION TO SEE WHY PURPLE FIN MATTERS

Extra protection near the coast.

Salt-laden air can accelerate corrosion on exposed metal surfaces. Purple Fin adds a protective coating to the outdoor heat-exchanger fins.

DON'T JUSTTHINK COOLER.THINK PURPLE.

BUILT SMARTER

Technology you can feel.

Useful information, not feature overload. Try the tools below, then open the Technical Library when you need full specifications.

INVERTER VS NON-INVERTER COST

Compare the monthly electricity cost.

Select a STRATO size, enter the rated input from a comparable non-inverter unit, then choose how many hours you expect to run it each day.

EFL HOUSEHOLD RATE USEDFJ$0.3503 / kWh101–300 kWh domestic band, VAT exclusive. EFL's 2026 domestic bands are 34.01c, 35.03c and 36.05c per kWh depending on monthly household consumption. View EFL tariff notice.
STRATO INVERTER—
NON-INVERTER—
ESTIMATED MONTHLY DIFFERENCE—
This compares rated input power at the same daily run time. It is a simple electricity-cost guide, not a guaranteed saving. Actual inverter consumption changes as room load changes.
HOW THE SYSTEMS OPERATE

Inverter vs non-inverter.

A simple illustration of what happens after the room approaches the set temperature.

POWER OUTPUT
INVERTER — adjusts output NON-INVERTER — full power / off STARTROOM NEAR SET TEMPERATURE
Inverter: output reduces as less cooling is needed.Non-inverter: compressor switches fully on and off.
Illustrative operating behaviour only. Actual power use varies by model, room load, installation and operating conditions.
AIR DISTRIBUTION

Direct comfort where it matters.

Use the controls to move the airflow illustration. The unit shown is the STRATO wall-mounted indoor unit supplied for this range.

STRATO wall mount indoor unit

CHOOSE AN AIRFLOW DIRECTION

R32 REFRIGERANT

Lower climate impact than R410A.

STRATO uses R32 across the range. Explore the comparison below.

0OZONE DEPLETION POTENTIAL
≈68% lower GWP than R410A

Using IPCC AR4 GWP values referenced by the US EPA. R32 equipment must still be installed and serviced correctly by trained technicians.

FIND YOUR STRATO

You don't need to speak in BTUs.

Choose the room type and drag the size slider. We'll give you a simple starting point.

USE THE CONTROLS →

YOUR STARTING POINT18K BTU

Estimated area-based load: ~15.4K BTU/h

General guide only. Final unit selection should be confirmed by a qualified technician after a site assessment.

THE RANGE

The STRATO range.
Built for different spaces.

HIGH-WALL INVERTERExplore Wall Mount →
STRATO wall mount indoor unitSTRATO outdoor unit

Wall-mounted comfort, refined.

For bedrooms, living spaces, offices and everyday commercial rooms.

9K12K18K24K30K36K
CASSETTE INVERTERExplore Cassette →
STRATO cassette indoor unitSTRATO outdoor unit

4-way cooling from above.

For larger spaces where balanced distribution and a clean ceiling finish matter.

24K30K36K42K48K
7YEARS

Warranty confidence, backed by local support.

STRATO is backed in Fiji by Altitude Group Fiji — with local technical support, servicing and spare-parts capability behind the brand.

7-Year Compressor Warranty
Local Technical Support
Servicing & Spare Parts
Backed by Altitude Group Fiji
Register your STRATO →Technical library →
18°C

Feels better,
doesn't it?

Tell us what you need to cool and the STRATO team can help you choose the right starting point.

Prefer to talk? Call +679 998 9537.

PROUDLY BROUGHT TO YOU IN FIJI BY

Lot 3 Motorex Complex, Nadi Back Road, Nadi, Fiji+679 998 9537info@stratoac.comwww.strato.com.fj

COOLING. REDEFINED.